- Up to 10 times better stability.
- Extremely tight tolerances of the slide through the round Twin Rail system.
- The slide has no contact with the main body of the machine. The whole construction is
connected only by the highly precise and extremely stable rail system.- Reduced friction / less wear
- Low maintenance / better reliability
- Improved cutter life
- Reduced cutter breakage
- Improved hole tolerances
- Improved hole surface quality
- Up to 110 mm cutting depth possible already with small machines
- It is directly connected to the engine.
- If the sensor is illuminating “RED” , the ground is dirty (rust, varnish residues, chips), the material is thinner than 6 mm or the feed rate is to high.
- The machine does not have a safe stand. The engine does not start or turns off.
- If the sensor is illuminating “GREEN”, the magnetic holding force is optimal and the use of the machine is safe.
- Core drilling Diameter 12 – 100 mm/15/32″ – 3.15/16″
- Twist drilling Diameter 3 – 32 mm/3/16″ – 1.17/64″
- Countersinking Diameter 10 – 55 mm/3/8″ – 2.11/64″
- Reaming Diameter 6 – 30 mm/15/64″ – 1.3/16″
- Tapping Diameter 6 – 32 mm/15/64″ – 1.17/64″